IBM 8668 - Eserver xSeries 232, Руководство по техническому обслуживанию аппаратной части

Страница: 11 / 182

General information
Your IBM
®
xSeries 232 is a high-performance, symmetric multiprocessing
(SMP) server. It is ideally suited for networking environments that require superior
microprocessor performance, efficient memory management, flexibility, and large
amounts of reliable data storage.
Your xSeries 232 comes with a three-year limited warranty and IBM PC Server
90-Day Start Up Support. If you have access to the World Wide Web, you can
obtain up-to-date information about your xSeries 232 model and other IBM server
products at the following World Wide Web address:
http://www.ibm.com/eserver/xseries/
Your server serial number and model number are located on labels on the rear of
the server and on the front below the bezel.
Note: The information label containing the serial number, machine type, model
number, and agency marks for your server is located as follows:
Tower model On the bottom of the server
Rack model On the side of the server
Features and specifications
The following table provides a summary of the features and specifications for your
xSeries 232 server.
Microprocessor:
v
Intel
®
Pentium
®
III microprocessor
v
256 or 512 KB Level-2 cache
v
Supports up to two microprocessors
Memory:
v
Maximum: 4 GB
v
Type: ECC, SDRAM, PC133, registered DIMMs
v
Two-way interleaved
v
Slots: four (Two-way interleaved)
Drives standard:
v
Diskette: 1.44 MB
v
CD-ROM: 48X IDE
Expansion bays:
v
Hot-swap: six slim high
v
Non-hot-swap: Three 5.25-inch (one used by CD-ROM drive)
v
3 pack option available
PCI expansion slots:
v
One 33 MHz/32-bit
v
Two 33 MHz/64-bit
v
Two 66 MHz/64-bit
© Copyright IBM Corp. 2000, 2001
3