IBM 8668 - Eserver xSeries 232, Руководство по техническому обслуживанию аппаратной части

Страница: 116 / 182

Error Code/Symptom FRU/Action
020-XXX-000 (Failed PCI Interface test)
1. System Board
030-XXX-000 (Failed Internal SCSI interface
test)
1. System Board
030-XXX-00N (Failed SCSI test on PCI slot
N. Check system error log before replacing
a FRU.)
1. Adapter
035-XXX-099
1. No adapters were found.
2. If adapter is installed re-check connection.
035-XXX-S99 (Failed RAID test on PCI slot
S. Check System Error Log before replacing
a FRU.)
1. Cable
2. SCSI Backplane
3. Adapter
4. System Board
035-XXX-SNN
(Check System Error Log
before replacing a FRU. NN = SCSI ID of
failing fixed disk.)
1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
035-253-S99 (RAID adapter initialization
failure)
1. ServeRAID Adapter in slot S is not configured properly. Obtain
the basic and extended configuration status and refer to the
ServeRAID Hardware Maintenance Manual for more information.
2. Cable
3. SCSI Backplane
4. Adapter
075-XXX-000 (Failed Power Supply test)
1. Power Supply
089-XXX-001 (Failed Microprocessor test)
1. VRM 1
2.
Microprocessor 1
3.
System Planar
089-XXX-002 (Failed Optional
Microprocessor test)
1. VRM 2
2. Microprocessor 2
3. System Planar
166-198-000 System Management: Aborted
(Unable to communicate with ASM
adapter. It may be busy. Run the test again)
(Communication with ASM adapter has
failed)
1. Re-run the Diagnostic test
2. Fix other error conditions and retry. These include other Failed
System Management tests, and items logged in the optional ASM
adapter’s System Error Log.
3. Disconnect all server and option power cords from server, wait 30
seconds, reconnect, and retry.
4.
Advanced System Management adapter, if installed.
5.
System board
166-201-000 System Management: Failed
(I2C Bus Error(s). (ISMP indicates 12C
errors on bus 0. Potential FRU: Memory
DIMMS, system board)
1. If installed, Reseat 12C cable between Advanced System
Management adapter (in PCI slot 1/J44) and planar (J45).
2. Reseat Memory DIMMS
3. Memory DIMMS
4. System Board
166-201-002 System Management: Failed
(I2C Bus Error(s). (ISMP indicates 12C
errors on bus 2. Potential FRUs: LED front
panel, system board)
1. Reseat 12C cable between operator information panel and planar
(J39).
2. Operator information panel
3. System Board
108
Hardware Maintenance Manual: Type 8668