IBM 8364 E series, Руководство пользователя, Страница: 95 / 150

Error code Error message What you should do
NSB61829 Token Ring error in full
duplex duplicate
address phase. Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61839 Token Ring error in
station query phase. Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
NSB61840 Error - open function
failure. Adapter failure. Replace the Network
Station logic unit, or the PCI Token Ring
card (see “Chapter 2. Replacing Network
Station parts” on page 9).
NSB61850 Error - signal loss. Verify network connection.
NSB61860 Error - wire fault. Verify network connection.
NSB61870 Error - ring speed
mismatch. Manually set the ring speed in the Local
(NVRAM) settings of the NS Boot utility,
or in the IBM Network Station Manager
program.
NSB61880 Error - time-out. Adapter failure. Replace the Network
Station logic unit, or the PCI Token Ring
card (see “Chapter 2. Replacing Network
Station parts” on page 9).
NSB61890 Error - ring failure. Verify that there are no problems with
the network, and restart the Network
Station.
NSB61900 Error - ring beaconing. Verify that there are no problems with
the network, and restart the Network
Station.
NSB61910 Error - duplicate MAC
address. Verify that the MAC address of the
Network Station is correctly defined (see
“Changing the local MAC address” on
page 49).
NSB61930 Error - remove received. Ensure that you are not blocked from
entering the ring.
NSB61940 Error - no active
network monitor. Manually set the ring speed in the Local
(NVRAM) settings of the NS Boot utility,
or in the IBM Network Station Manager
program.
NSB61950 Error - active network
monitor contention. Verify that there are no problems with
the network, and restart the Network
Station.
Chapter 11. Identifying problems with hardware that is configured for NS Boot
83