IBM 8364 E series Скачать руководство пользователя страница 53

Страница: 53 / 150

Network Station hardware performed, for explanations of any common
problem indicators the you experience, such as:

System LED indications.

Error codes and text messages.

Audio beep sequences.

Changing firmware configurations

You may decide that you want to change your firmware configuration. The
following procedures explain how to change your firmware configuration
from within the firmware utilities.

Switching from the NS Boot for Network Station Manager configuration

To return to the Change Firmware Support menu after you have chosen the
NS Boot for Network Station Manager

selection, perform the following

procedure:

Press Esc during the Network Station startup sequence.

Highlight Service aids and press Enter.

Highlight Change firmware support and press Enter.

Highlight the firmware option of your choice, and press Enter.

Press F10 to restart the Network Station.

Switching from the BIOS for WorkSpace On-Demand configuration

To return to the Change Firmware Support menu after you have chosen the
BIOS for WorkSpace On Demand

selection, perform the following procedure:

Press F1 when the IBM Network Station logo displays.

When you see the prompt for the administrator password, enter

IBMNCD

Select the Start Options menu from the Configuration/Setup Utility menu
and press Enter.

Scroll down to the Firmware Selection field.

Using the left arrow keys and the right arrow keys, select the Other
Operating Systems

option.

Press Esc to exit the Start Options menu.

Press Esc to exit the Configuration/Setup Utility menu.

Highlight the Yes, save and exit the Setup Utility option, and press Enter.
The Network Station automatically restarts.

Chapter 7. Selecting a setup utility

Содержание 8364 E series






















































































































































Результаты поиска

Содержание 8364 E series

Отзывы:

IBM 8364 E series, Руководство пользователя, Страница: 53 / 150

Результаты поиска

Содержание 8364 E series

Отзывы: