IBM 8364 E series, Руководство пользователя, Страница: 118 / 150

card” on page 24). Both procedures will reset the administrator password to
the default value, IBMNCD. To change this setting, refer to “Changing the
administrator password” on page 58.
Attention: All configuration error codes appear in the upper left corner of
the screen.
Table 10. Configuration errors
Error code Error message Cause Suggested actions
114, 1805,
1885 Adapter ROM
Error An option ROM
has failed Restart the Network Station; or,
Replace the logic unit (see
“Replacing the logic unit” on
page 9).
161 Bad CMOS
Battery CMOS was
corrupted Perform the procedure,
“Exchanging the lithium
battery” on page 20.
162 Configuration
Error Configuration has
changed from
previous boot Action is not necessary.
165 Date and Time
Incorrect Battery has failed Perform the procedure,
“Exchanging the lithium
battery” on page 20.
164 Memory Size
Error Memory size has
changed Action is not necessary.
1101 System Board
Failure Unknown failure Clear CMOS (see “Clearing the
administrator password and
CMOS, creating a recovery
CompactFlash card, and reading
a CompactFlash card” on
page 24); or, replace the logic
unit (see “Replacing the logic
unit” on page 9).
201 Memory Error Memory test failed Ensure that any memory
DIMMs are correctly installed;
or, replace the memory DIMM
(see “Exchanging the memory”
on page 20).
301, 303 Keyboard Error Keyboard test
failed Restart the Network Station and
do not press any keys; or, verify
that you connected the
keyboard cable to the correct
port on the back of the
Network Station. If the problem
continues, replace the keyboard.
106
IBM Network Station