IBM 8275 Скачать руководство пользователя | Manualshive

Страница: 88 / 110

background image

instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
his own expense.

Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Industry Canada Class A Emission Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Avis de conformité aux normes d’Industrie Canada

Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.

European Norm (EN) Statement

This product is in conformity with the protection requirements of EU Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility. IBM cannot accept responsibility for any
failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard EN
55022. The limits for Class A equipment were derived from commercial and
industrial environments to provide reasonable protection against interference with
licensed communication equipment.

Warning: This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.

Zulassungsbescheinigung laut dem Deutschen Gesetz über die
elektromagnetische Verträglichkeit von Geräten (EMVG) vom 30. August 1995
(bzw. der EMC EG Richlinie 89/336)

Dieses Gerät ist berechtigt in Übereinstimmung mit dem Deutschen EMVG das
EG-Konformitätszeichen - CE - zu führen.

Verantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die
IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.

74

8275-416 User’s Guide

«
...
86
87
88
89
90
...
»

Содержание 8275















































































































Отзывы:

Нет отзывов

Похожие инструкции для 8275

Бренд: E-Trailer Страницы: 8

Hub M50 Mesh Cube

Бренд: Xunison Страницы: 11

SynOptics 3000 Series

Бренд: Cabletron Systems Страницы: 101

Бренд: DLS Страницы: 226

Бренд: Gefen Страницы: 14

Бренд: OTS Страницы: 3

TM-1-8290/E/SVB

Бренд: Eaton Страницы: 2

Бренд: Stahl Страницы: 28

Бренд: Videosec Страницы: 3

BZ-UHD-88M100-ARC

Бренд: BZB Gear Страницы: 42

Бренд: EGig Страницы: 10

Бренд: Cooper Crouse-Hinds Страницы: 24

kontron KSwitch D1 UGP

Бренд: S&T Страницы: 39

Ulusoy URING36 F-SF6

Бренд: Eaton Страницы: 14

Бренд: Cabletron Systems Страницы: 12

Бренд: CYP Страницы: 44

Бренд: CYP Страницы: 24

Бренд: Larson Electronics Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды