IBM 8275, Руководство пользователя

Страница: 47 / 110

Define one of the following values:
Unit ID
Up to 8 alphanumeric characters which identifies the 8275-416 .
Network Configuration Protocol Desired
When you select BootP/Static DHCP (the default), the 8275-416 periodically
sends requests to a BootP or DHCP server until a response is received. If
you are not using BOOTP or DHCP, set the Network Configuration Protocol
with a value of
None to reduce network traffic.
Configuring SNMP
The 8275-416 has an SNMP agent that complies with SNMP Version 1 (SNMPV1).
For more about the SNMP specification, see the appropriate SNMP RFCs. The
SNMP agent sends traps through TCP/IP to an external SNMP manager based on
your SNMP configuration. SNMP configuration for the 8275-416 includes configuring
the trap receiver and SNMP community parameters, which are described in the
following text.
Configuring the SNMP Community
The SNMP agent must be configured with a community name for the 8275-416 . A
community name is a name associated with the 8275-416 and with a set of SNMP
managers allowed to manage it with a specified privileged level. You can add,
change or delete communities. The 8275-416 does not have to be reset for
changes to take effect. Up to six communities are simultaneously supported.
To configure your SNMP communities, select SNMP Community Configuration
Menu from the Management Menu. Figure 20 on page 34 shows SNMP community
information you need to specify.
Figure 19. Server Configuration
Chapter 4. Using the Terminal Interface
33