IBM 8275, Руководство пользователя

Страница: 34 / 110

effect, but the changes are not automatically retained across a reset or power cycle.
SAVE makes the changes take effect and also result in the changes being retained
across a reset or power cycle.
Saving Configuration Changes Across a Reset or Power Cycle
In order for configuration changes to be retained across a reset or power cycle, you
must issue a SAVE command.
Making Configuration Changes via the Terminal Interface
This section provides information about making configuration changes, getting the
changes put into effect, and retaining the changes across a power cycle when using
the Terminal Interface.
Making Configuration Changes
On the terminal interface menus, field entries that can be modified are surrounded
by either square brackets ([ ]) or angle brackets (< >).
Square brackets identify an item that can be changed by typing in text. As soon as
you begin typing, the current value of the field is erased and is replaced by the new
text. In other words, no insert or overwrite modes can be performed in the field. You
can use the following special keys while you are editing text fields:
v
Arrow keys: Arrow keys are ignored when you are editing a text field. On a field
where no modifications have been made, arrow keys are used to move the
cursor to the appropriate field indicated by the direction of the arrow key pressed.
v
Back Space: Removes a character in front of the cursor.
v
Delete: Gives the same result as the Backspace.
v
Enter: The text is accepted and the cursor moves to the next field. On a text field
where no modifications have been made, Enter moves the cursor to the next
field.
v
ESC: Stops editing the field and restores the original data.
v
Space Bar: May be an allowable key to enter text.
v
Tab: Performs the same function as the Enter key.
v
F4: Represents SAVE. Causes the configuration data to be saved and also
applied if not already done.
Angle brackets identify an item that can be changed by selecting the desired option.
The following special keys are used while selecting a configuration option:
v
Arrow keys: The text is accepted and the cursor moves to the appropriate field
indicated by the direction of the arrow key pressed. On a field where no
modifications have been made, arrow key just moves the cursor to the
appropriate field.
v
Enter: The text is accepted and the cursor moves to the next field. On a field
where no modifications have been made, Enter moves the cursor to the next
field.
v
ESC: Stops modifying the field and restores the original data.
v
Space Bar: Displays the next possible value for this field. Used to cycle through
the available options to select the desired value.
v
Tab: Performs the same function as the Enter key.
20
8275-416 User’s Guide