IBM 8275, Руководство пользователя

Страница: 53 / 110

The following parameters are for configuring a Telnet session with the 8275-416 :
Telnet Login Timeout
A session is active as long as the session has not remained idle for the
value set. Specify a decimal value from 0 to 160 minutes. A value of 0
indicates that a Telnet session remains active indefinitely. The default is 5
minutes.
Maximum Number of Telnet Sessions
Specify a decimal value from 0 to 5. If the value is 0, no telnet session can
be established. The default value is 5.
Allow New Telnet Sessions:
Specify a value of Yes or No. A value of Yes means that new telnet
sessions will be establish until there are no more sessions available. A
value of No means that no new telnet session are to be established. If there
are no sessions at the moment, and you indicate that the value is to be
applied or saved, then no Telnet connections are allowed. Any already
established session remains active until the session is ended or an
abnormal network error ends it. The default value is Yes.
Ping
The 8275-416 provides a Ping utility that can be used to check connectivity
between devices in a network. To use ping, the 8275-416 must be configured
correctly for network (in-band) connectivity. The source and target devices must
have the ping utility enabled and running on top of TCP/IP. The 8275-416 can be
pinged from any IP workstation (as long as there is a physical path between the
8275-416 and the workstation). The terminal interface allows you to send one ping,
three pings or a continuous ping to the target station.
To use Ping, select Management Menu from the Main Menu. Then select Ping
Menu from the Management Menu (see Figure 26 on page 40).
Figure 25. Telnet Configuration
Chapter 4. Using the Terminal Interface
39