IBM 8270, Инструкция по установке и обслуживанию

Страница: 30 / 98

grounding precautions. Electrostatic discharge into or around the
uninstalled module can permanently damage it.
Step 3. Visually inspect the Token-Ring Processor Card to ensure that it was not
damaged during shipment.
Step 4. This package should also contain:
Ø
One Safety Manual
Ø
One CD-ROM
If any item is missing or damaged, contact your place of purchase.
Unpacking the 8270 Chassis
Step 1. Open the carton containing the 8270 chassis.
Step 2. Remove the 8270 chassis from its protective packaging.
Step 3. Visually inspect the 8270 chassis to ensure that it was not damaged
during shipment.
Note: The 8270-800 chassis should have one power supply installed in
the rightmost power supply slot.
Step 4. The package should also contain:
Ø
One Safety Manual
Ø
One Service Information card
Ø
One cable management bracket
Ø
One power cord
Ø
IBM 8270 Publication CD-ROM
If any item is missing or damaged, contact your place of purchase.
Other Materials You Will Need
To install the 8270, you need a cabling chart from your network administrator.
If the 8270 is to be rack-mounted, you also need:
¹
A rack inventory chart from your network administrator
¹
Screws and appropriate tools (screwdriver, and so on) for attaching the cable
management bracket and the 8270 to the rack.
Note: If you are installing an 8270-600, skip to “Surface Mounting” on page 2-5.
If you are installing an 8270-800, continue to “Installing the Token-Ring Processor
Card (8270-800 Only)” on page 2-3.
2-2
8270 Nways LAN Switch Models 600 and 800