IBM 7870B4U, Руководство по обслуживанию

Страница: 166 / 268

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 4, “Parts listing,” on page 41 to determine which components are customer replaceable units
(CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
Trained service technician.
Error code Description Action
0051009 No memory detected.
1.
Make sure one or more DIMMs are installed in
the server.
2. Reseat the DIMMs and restart the server (see
“Removing a memory module” on page 64 and
“Installing a memory module” on page 65).
3. Make sure that the DIMMs have been installed in
the correct sequence (see “Installing a memory
module” on page 65 for more information).
4.
(Trained service technician) Replace the
microprocessor that controls the failing DIMMs
(see “Removing a microprocessor and heat sink”
on page 90 and “Installing a microprocessor and
heat sink” on page 94).
5. (Trained service technician only) Replace the
system board (see “Removing the system-board
assembly” on page 97 and “Installing the
system-board assembly” on page 98).
00580A1 Unsupported DIMM populated for
mirroring mode.
1. If a DIMM connector error LED is lit on the
system board, check the event logs and follow
the procedure for that event and restart the
server.
2.
Make sure that the DIMMs have been installed in
the correct sequence for mirroring mode (see
“Installing a memory module” on page 65).
00580A2 Invalid DIMM population for memory
mode.
1. Make sure that the DIMMs are installed in the
proper sequence (see “Installing a memory
module” on page 65).
2. Reseat the DIMMs and restart the server (see
“Removing a memory module” on page 64 and
“Installing a memory module” on page 65).
3. Remove each DIMM one at a time, restarting the
server after removing each DIMM until the error
is gone (see “Removing a memory module” on
page 64).
4. Replace the failed DIMM; then, reinstall the
DIMMs to their original connectors and restart
the server (see “Installing a memory module” on
page 65).
5. (Trained service technician only) Replace the
system board (see “Removing the system-board
assembly” on page 97 and “Installing the
system-board assembly” on page 98).
00580A4 Memory population changed. Information only. Memory has been added, moved,
or changed.
152
BladeCenter HS22 Type 7870, 1936, and 1911: Problem Determination and Service Guide