IBM 71455RU, Инструкция по установке и эксплуатации

Страница: 74 / 136

Installing a QPI wrap card
Wrap card
Release
latch
In a one node server only, if your server has more than two microprocessors
installed, you must install two QPI wrap cards in the server.
To install a QPI wrap card, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 32.
2. Turn off the server and peripheral devices, and disconnect the power cord and
all external cables.
3. Rotate the blue release latch on the QPI wrap card handle and pull the handle
to the open position.
4. Push the wrap card into the bay, and slide the handle to the locked position.
5. Reconnect the cables and power cords (see “Connecting the cables” on page
71).
6. Turn on all attached devices and the server.
56
IBM System x3850 X5 and x3950 X5 Types 7145 and 7146: Installation and User’s Guide