IBM 71455RU, Инструкция по установке и эксплуатации

Страница: 113 / 136

3. From the menu on the left side of the page, click System x support search .
4. From the Task menu, select Install .
5. From the Product family menu, select System x3850 X5 and System x3950
X5 .
6. From the Operating system menu, select your operating system, and then click
Search to display the available installation documents.
Using the integrated management module
The integrated management module (IMM) is a second generation of the functions
that were formerly provided by the baseboard management controller hardware. It
combines service processor functions, video controller, and remote presence
function in a single chip.
The IMM supports the following basic systems-management features:
v
Active Energy Manager.
v
Alerts (in-band and out-of-band alerting, PET traps - IPMI style, SNMP, e-mail).
v
Auto Boot Failure Recovery.
v
Automatic Server Restart (ASR) when POST is not complete or the operating
system hangs and the operating-system watchdog timer times out. The IMM
might be configured to watch for the operating-system watchdog timer and restart
the server after a timeout, if the ASR feature is enabled. Otherwise, the IMM
allows the administrator to generate an NMI by pressing a nonmaskable interrupt
button on the information panel for an operating-system memory dump. ASR is
supported by Intelligent Peripheral Management Interface (IPMI).
v Boot sequence manipulation.
v
Command-line interface.
v
Configuration save and restore.
v
DIMM error assistance. The Unified Extensible Firmware Interface (UEFI)
disables a failing DIMM that is detected during POST, and the IMM lights the
associated system-error LED and the failing DIMM error LED.
v
Environmental monitor with fan speed control for temperature, voltages, fan
failure, and power supply failure.
v Intelligent Platform Management Interface (IPMI) Specification V2.0 and
Intelligent Platform Management Bus (IPMB) support.
v
Invalid system configuration (CNFG) LED support.
v Light path diagnostics LEDs to report errors that occur with fans, power supplies,
microprocessor, hard disk drives, and system errors.
v
Nonmaskable interrupt (NMI) detection and reporting.
v
Operating-system failure blue screen capture.
v PCI configuration data.
v
PECI 2 support.
v Power/reset control (power-on, hard and soft shutdown, hard and soft reset,
schedule power control).
v
Query power-supply input power.
v ROM-based IMM firmware flash updates.
v
Serial over LAN (SOL).
v Serial port redirection over Telnet or SSH.
v
System-event log.
Chapter 3. Configuring the server
95