IBM 7014-T42 Скачать руководство пользователя | Manualshive

Страница: 71 / 74

background image

Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen
- CE - zu führen.

Verantwortlich für die Einhaltung der EMV Vorschriften ist der Hersteller:
International Business Machines Corp.
New Orchard Road
Armonk, New York 10504
Tel: 914-499-1900

Der verantwortliche Ansprechpartner des Herstellers in der EU ist:
IBM Deutschland GmbH
Technical Regulations, Abteilung M372
IBM-Allee 1, 71139 Ehningen, Germany
Tel: +49 7032 15 2941
email: [email protected]

Generelle Informationen:

Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.

Terms and conditions

Permissions for the use of these publications are granted subject to the following terms and conditions.

Applicability:

These terms and conditions are in addition to any terms of use for the IBM website.

Personal Use:

You may reproduce these publications for your personal, noncommercial use provided that

all proprietary notices are preserved. You may not distribute, display or make derivative works of these
publications, or any portion thereof, without the express consent of IBM.

Commercial Use:

You may reproduce, distribute and display these publications solely within your

enterprise provided that all proprietary notices are preserved. You may not make derivative works of
these publications, or reproduce, distribute or display these publications or any portion thereof outside
your enterprise, without the express consent of IBM.

Rights:

Except as expressly granted in this permission, no other permissions, licenses or rights are

granted, either express or implied, to the Publications or any information, data, software or other
intellectual property contained therein.

IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of
the publications is detrimental to its interest or, as determined by IBM, the above instructions are not
being properly followed.

You may not download, export or re-export this information except in full compliance with all applicable
laws and regulations, including all United States export laws and regulations.

IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE
PUBLICATIONS ARE PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.

Notices

59

«
...
69
70
71
72
73
...
»

Содержание 7014-T42











































































Отзывы:

Нет отзывов

Похожие инструкции для 7014-T42

Бренд: CAP Страницы: 4

Бренд: Niche Страницы: 3

ScreenOut OH 46

Бренд: HAGOR Страницы: 24

Бренд: Gnr Страницы: 1

Info-Tower Dual L

Бренд: HAGOR Страницы: 16

Бренд: PRO SIGNAL Страницы: 6

Бренд: d&b audiotechnik Страницы: 22

Бренд: B-Tech Страницы: 20

Бренд: Wali Страницы: 12

SP1-HW - BUZZRIDER

Бренд: Hollywood Racks Страницы: 4

Бренд: B-Tech Страницы: 16

Бренд: Amada Homefurnishing Страницы: 12

Бренд: Bauhn Страницы: 2

Бренд: MantelMount Страницы: 20

Бренд: DeWalt Страницы: 16

Бренд: DeWalt Страницы: 19

Бренд: DeWalt Страницы: 15

Бренд: DeWalt Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды