IBM 6889 - IntelliStation M - Pro, Руководство пользователя

Страница: 123 / 182

POST Message Description
1884 A Plug and Play adapter has requested a memory address that is
not available.
Action:
1. Make sure that all ISA legacy adapters are set correctly in the
Configuration/Setup Utility program. If the memory address
settings are not correct, change and save the settings. Setting
the resources used by ISA legacy adapters to ISA Resource
enables the Plug and Play function to configure around the
legacy adapters.
For background information on PCI, ISA, Plug and Play, and
legacy (non-Plug and Play) adapters, refer to Installing Options
in Your IntelliStation M Pro. For information about required
memory resource settings for ISA legacy adapters, refer to the
documentation that comes with these adapters. For
instructions on using the Configuration/Setup Utility program,
see Chapter 5, “Using the Configuration/Setup Utility
Program” on page 29.
2. Make sure that switches on all ISA legacy adapters are set
correctly. For information about switch settings, refer to the
documentation that comes with the ISA legacy adapters.
3. If all memory addresses are being used by ISA legacy
adapters, you might need to remove an ISA legacy adapter to
make a memory address available to the Plug and Play
adapter you want to install. For instructions on removing
adapters, see Installing Options in Your IntelliStation M Pro.
Note: If you remove an ISA legacy adapter, set the memory
address used by the removed adapter to Available
before installing another adapter.
4. If you have other PCI or Plug and Play adapters installed, you
might need to remove one of these adapters to make a
memory address available to the Plug and Play adapter you
want to install.
If the problem cannot be isolated and corrected, have the computer
serviced.
1885 A Plug and Play adapter read-only memory (ROM) error occurred.
Action: Remove all of the Plug and Play adapters that are not
required for system startup and reinstall them one at a time,
powering on after each is reinstalled. When this message displays,
replace the adapter just installed.
If the problem cannot be isolated and corrected, have the computer
serviced.
Chapter 8. Solving Problems
109