IBM 6889 - IntelliStation M - Pro, Руководство пользователя, Страница: 110 / 182

POST Message Description
187 A problem occurred with the administrator password and startup
(boot) sequence. POST message 167 will normally display, also.
Action: If enhanced security is not enabled, use the
Configuration/Setup Utility program to:
1. Clear the startup sequence (Start Options, Startup sequence).
2. Clear the administrator password. For instructions, see
“Deleting an Administrator Password” on page 57.
3. Reload the default settings (Load Default Settings).
4. Reset an administrator password. For instructions, see “Setting
or Changing an Administrator Password” on page 55.
For instructions on using the Configuration/Setup Utility program,
see Chapter 5, “Using the Configuration/Setup Utility Program”
on page 29.
190 The computer chassis-intrusion detector was cleared. This is an
informational message. No action is required.
20X A failure occurred during the testing of memory. This error can be
caused by incorrectly installed memory, a failing DIMM, or a
system-board failure.
Action:
1. If you have added memory, see “Memory DIMM Options” on
page 77 and Chapter 5, “Using the Configuration/Setup
Utility Program” on page 29 of this booklet to verify that the
new memory is correct for your computer, and that it is
installed and configured correctly.
2. Run the diagnostic programs to verify the problem. (See “IBM
Enhanced Diagnostics” on page 125 for information about
diagnostic programs provided with your computer.)
If the problem cannot be isolated and corrected, have the computer
serviced.
96
IntelliStation M Pro User Guide