IBM 6889 - IntelliStation M - Pro, Руководство пользователя

Страница: 74 / 182

switch. Move the switch to the ON position. (To do this, push on the ON
side.)
4. Set, change, or delete your administrator password in the Configuration/Setup
Utility program. Refer to “Setting or Changing an Administrator Password” on
page 55 or “Deleting an Administrator Password” on page 57 for instructions.
Note: You must know the administrator password to change or delete it.
5. Move the switch back to the OFF position after you have set, changed, or
deleted your password.
6. Replace the cover, and then turn on the computer.
Erasing a Lost or Forgotten Administrator Password Protected by
Enhanced Security:
When enhanced security is enabled, it is vital that you keep
a record of your administrator password in a secure place. If you forget or lose the
administrator password, the system board in your computer must be replaced in
order to regain access to the Configuration/Setup Utility program.
Setting the Startup Sequence
Your computer can be started (or booted) from several devices including the hard
disk drive, diskette drive, CD-ROM drive, and from the network. The startup
program looks for these devices in a selected sequence. The Configuration/Setup
Utility program is used to select the startup sequence.
Note: The hard disk drive is the default startup device when no other devices are
ready. It does not appear in the choices provided by the
Configuration/Setup Utility program.
To set the startup sequence:
1. Start the Configuration/Setup Utility program (see “Starting and Using the
Program” on page 30).
2. Select Start Options from the Configuration/Setup Utility program menu.
3. Select Startup Sequence from the Start Options menu.
4. Select the sequence and devices from the choices provided.
5. If Automatic Power On Startup Sequence is Enabled, select the sequence and
devices from the choices provided.
6. Press Esc until you return to the Configuration/Setup Utility program menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu and press Enter.
60
IntelliStation M Pro User Guide