IBM 6868 - IntelliStation M - Pro, Руководство пользователя

Страница: 67 / 188

Other settings in the Configuration/Setup Utility
program
The information in this section includes instructions for changing other
settings using the Configuration/Setup utility program, such as the startup
sequence, remote administration, and power management.
Changing and viewing the startup sequence
Your computer can be started from several devices including the hard disk
drive, diskette drive, CD-ROM drive, or from the network. The startup
program looks for these devices in a selected sequence. A different startup
sequence can be selected for when your computer is turned on using the
power switch than when it is turned on automatically, such as over a LAN
or by a timer. The Configuration/Setup utility is used to select the primary
startup sequence and the automatic power on startup sequence.
Primary startup sequence
These settings are used to select the sequence of devices used to startup
your computer when it is turned on using the power switch. The default
settings for the primary startup sequence are shown here.
First startup device [Diskette drive]
Second startup device [Hard disk ð]
Third startup device [Network]
Fourth startup device [Disabled]
Automatic power on startup sequence
These settings are used to select the sequence of devices used to startup
your computer when it is turned on automatically by a timer, a PCI device,
or by a wake up request from the LAN. The default settings for the
automatic power on startup sequence are shown here.
First startup device [Network]
Second startup device [Hard disk ð]
Third startup device [Disabled]
To view or change the primary or automatic power on startup sequence:
1. Start the Configuration/Setup utility program (see “Starting and using
the Configuration/Setup Utility program” on page 43).
2. Select Start Options and press Enter.
3. Select Startup Sequence from the Start Options menu and press Enter.
Chapter 4. Using the Configuration/Setup Utility program
53