IBM 6868 - IntelliStation M - Pro, Руководство пользователя

Страница: 33 / 188

Information for Windows NT Workstation only
The following information is for computers running Windows NT
Workstation only.
Setting up your hard disk partitions
Your hard disk has a 2 GB partition (referred to as drive C). This partition
contains Windows NT Workstation and the other preinstalled software.
Important: The remaining hard disk space has been left unformatted and
cannot be used until you partition it.
You can format and partition hard disk space into multiple drives (such as
C, D, and E) as you wish. For example, if you want to install another
operating system, it can be installed into a separate primary partition.
To set up your hard disk partitions:
1. In the Access IBM menu, click Start up.
2. In the Start up menu, click Partition your hard disk.
3. Disk Administrator starts. If you need more information about
partitioning your hard disk, click Help on the Disk Administrator
screen.
4. After creating your hard disk partitions, close the Disk Administrator
program.
Creating an emergency repair disk
At your earliest opportunity, create a Microsoft Windows NT Emergency
Repair Disk. It is important that you create this diskette, which can be used
for recovery purposes. If you add features to your computer, create a new
Emergency Repair Disk to ensure that the diskette reflects your current
system configuration. Additional information about creating and using the
diskette is in your Windows NT Workstation manual.
Service Pack 5
Service Pack 5 is a Windows NT Workstation update made available to
Windows NT Workstation users by Microsoft.
To install device drivers without affecting the Service Pack 5 installation,
you must install the device drivers from the I386 directory on drive C. If
you install device drivers from any directory or device other than the I386
directory on drive C, you will have to reinstall Service Pack 5.
Chapter 2. Setting up your computer
19