IBM 425162U, Инструкция по установке и эксплуатации

Страница: 80 / 106

The next time the server starts, it returns to the startup sequence that is set in the
Setup utility.
Starting the backup server firmware
The system board contains a backup copy area for the server firmware. This is a
secondary copy of the server firmware that you update only during the process of
updating the server firmware. If the primary copy of the server firmware becomes
damaged, use this backup copy.
To force the server to start from the backup copy, turn off the server; then, place the
JP6 jumper in the backup position (pins 2 and 3).
Use the backup copy of the server firmware until the primary copy is restored. After
the primary copy is restored, turn off the server; then, move the JP6 jumper back to
the primary position (pins 1 and 2).
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are designed for your server. The ServerGuide program
detects the server model and hardware options that are installed and uses that
information during setup to configure the hardware. Use this CD during the initial
installation of the server to simplify the operating-system installations by providing
updated device drivers and, in some cases, installing them automatically. To
download the CD, go to http://www.ibm.com/systems/management/serverguide/
sub.html and click
IBM Service and Support Site .
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
To start the ServerGuide Setup and Installation CD, complete the following steps:
1. Insert the CD, and restart the server. If the CD does not start, see “ServerGuide
Problems” in the Problem Determination and Service Guide on the System x
Documentation CD.
2. Follow the instructions on the screen to:
a. Select your language.
b. Select your keyboard layout and country.
c. View the overview to learn about ServerGuide features.
d. View the readme file to review installation tips for your operating system and
adapter.
e. Start the operating-system installation. You will need your operating-system
CD.
The ServerGuide program has the following features:
v
An easy-to-use interface
v Diskette-free setup, and configuration programs that are based on detected
hardware
v
ServeRAID Manager program, which configures your ServeRAID adapter
v Device drivers that are provided for your server model and detected hardware
v
Operating-system partition size and file-system type that are selectable during
setup
64
IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide