IBM 425162U, Инструкция по установке и эксплуатации

Страница: 74 / 106

The following table lists the different server configurations and the applications
that are available for configuring and managing RAID arrays.
Table 12. Server configuration and applications for configuring and managing RAID arrays
Server configuration
RAID array configuration
(before operating system is
installed) RAID array management
(after operating system is
installed)
ServeRAID-BR10il v2
adapter installed LSI Utility (Setup utility, press
Ctrl+C), ServerGuide MegaRAID Storage Manager
(for monitoring storage only)
ServeRAID-MR10i adapter
installed MegaRAID Storage Manager
(MSM), MegaRAID BIOS
Configuration Utility (press C
to start), ServerGuide MegaRAID Storage Manager
(MSM)
ServeRAID-MR10is VAULT
adapter installed MegaRAID Storage Manager
(MSM), MegaRAID BIOS
Configuration Utility (press C
to start), ServerGuide MegaRAID Storage Manager
(MSM)
v IBM Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings
and IMM settings. Use the ASU program online or out of band to modify UEFI
settings from the command line without the need to restart the server to access
the Setup utility. For more information about using this program, see “IBM
Advanced Settings Utility program” on page 73.
Using the Setup utility
Use the Setup utility to perform the following tasks:
v View configuration information
v
View and change assignments for devices and I/O ports
v Set the date and time
v
Set the startup characteristics of the server and the order of startup devices
v Set and change settings for advanced hardware features
v
View, set, and change settings for power-management features
v
View and clear error logs
v Resolve configuration conflicts
Starting the Setup utility
To start the Setup utility, complete the following steps:
1. Turn on the server.
Note: Approximately 1 to 3 minutes after the server is connected to ac power,
the power-control button becomes active.
2. When the prompt
<F1> Setup
is displayed, press F1. If you have set an
administrator password, you must type the administrator password to access the
full Setup utility menu. If you do not type the administrator password, a limited
Setup utility menu is available.
3. Select settings to view or change.
Setup utility menu choices
The following choices are on the Setup utility main menu. Depending on the version
of the firmware, some menu choices might differ slightly from these descriptions.
58
IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide