IBM 425162U, Инструкция по установке и эксплуатации

Страница: 29 / 106

For more information about IBM Systems Director, see the documentation on the
IBM Systems Director CD that comes with the server and the IBM xSeries Systems
Management Web page at http://www.ibm.com/systems/management/, which
presents an overview of IBM Systems Management and IBM Systems Director.
The Update Xpress System Packs
The Update Xpress System Packs provide an effective and simple way to update
device drivers, server firmware, and firmware of supported options contained within
the server, for System x and IBM BladeCenter
®
servers. Each Update Xpress
System Pack contains all the online driver and firmware updates for a specific
machine type and operating system combination. The Update
Xpress System Packs
are released quarterly. Use the Update Xpress System Pack Installer to install the
current Update Xpress System Pack for your server. You can download the installer
and the latest Update Xpress System Pack for your server from the Web at no
additional cost. To download the installer or the latest Update Xpress System Pack,
go to http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=SERV-XPRESS&brandind=5000008 or complete the following
steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support , click System x .
3. Under Popular links , click Software and device drivers .
4. Under Related downloads , click UpdateXpress .
Server controls, LEDs, and power
This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off. For the locations of other LEDs on the system board, see
“System-board LEDs” on page 25.
Front view
The following illustrations show the controls, LEDs, and connectors on the front of
the hot-swap 3.5-inch hard disk drive model.
Power-on LED
Power-control button
Reset button
Hard disk drive activity LED
Locator LED
System-error LED
USB 1 connector
USB 2 connector
Hard disk drive status
LED (amber)
Hard disk drive activity
LED (green)
The following illustration shows the controls, LEDs, and connectors on the front of
the simple-swap 3.5-inch hard disk drive model.
Chapter 1. The System x3250 M3 server
13