6. Ensure the ASF assembly is installed correctly.
The ASF assembly has 2 hook latches, and each fits into 1 of 2 slots on the rear printer frame, directly
behind the platen. You can disengage the hook latches. For detailed ASF installation instructions, see:
IBM IBM 4247 Printer Automatic Sheet Feeder Guide or
IBM 4247 Printer Models 001, 002 User’s Guide. Or the IBM 4247 Printer Model 003 User’s Guide.
7. Ensure the paper load bin lever on each ASF bin is closed:
v
The load lever is located on the right side of each bin, when viewed from the rear of the printer. See
Figure 74 on page 321.
v
The lever is closed when it is pushed as far toward the front of the printer as possible.
8. Ensure that the paper guide on each side of each bin is correctly adjusted:
v
Standing behind the printer, set the inside edge of the right paper guide to the scribe mark and use the
paper guide locking lever to lock the position. See Figure 74 on page 321.
v
Set the left paper guide to touch the left edge of the forms in the bin. Use the left paper guide locking
lever to lock the position.
9. On bin 1 only, ensure that the left and right forms selectors are set correctly. (Bin 2 and bin 3 always have
corner bucklers; only feed single-sheet paper from these bins.)
v
Slide both selectors away from the printer to feed a single sheet and engage the corner bucklers.
v
Slide both selectors toward the printer to feed envelopes or card stock. See Figure 74 on page 321.
Note: Some multiple-part forms may feed better with the forms selectors set toward the printer. Test forms
in this position if results were not satisfactory with the forms selectors set away from the printer.
Chapter 5. Removals and Adjustments
320
Содержание 4247
