IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 320

IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 95

Adjusting the Forms Thickness Setting
To adjust the lightness or darkness of the print, you must increase or
decrease the gap between the print head and the platen rod. This
distance is automatically set for you by the Automatic Forms
Thickness Adjustment (AFTA), but you can make corrections to the
distance if the print output is not as you desire. It is up to you to
decide if the print is dark (or light) enough to meet your
requirements.

To adjust the forms thickness setting with the F2 forms device, follow
these steps:

1. The forms thickness setting must be adjusted when the printer is

printing or has printed and is

ready. Press Start, if needed, to

have the printer display

2. To make the print darker, press Darker.

The printer displays

The print head moves closer to the paper, and the print becomes
darker.

Note: The print may not get darker if the ribbon is worn or if
there is a problem with the print head.

3. To make the print lighter, press Lighter.

The printer displays

The print head moves farther away from the paper, and the print
becomes lighter.

READY

<A>

LIGHT |wwwwwwwwwwww-------| DARK

LIGHT |wwwwwwww-----------| DARK

Chapter 1. Setting Up the 4230 Printer

1-73

«
...
93
94
95
96
97
...
»

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

































































































































































































































































































































Отзывы:

Нет отзывов