IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 102

Страница: 102 / 320

The limits for the Tear-off Position Adjustment from the default
position is

19.05 mm (0.75 in.).

Note: If the last page of the form feeds past the forms sensor,
the printer displays

and pressing Load/Eject ejects the paper.

To remove the form, follow these steps:

1. Tear off the paper toward the front of the printer.

2. Press Load/Eject to position the next form back to the top of

form position.

The Ready indicator comes on, and you are ready to print the
next print job.

ðð1 END OF FORMS

LOAD FORMS

1-80

User’s Guide

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

































































































































































































































































































































Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы:

IBM 4230 - Model 4i3 B/W Dot-matrix Printer, Руководство пользователя, Страница: 102 / 320

Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы: