IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 320

IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 4

Note!

Before using this information and the product it supports, be sure to read the
general information under “Notices” on page ix.

|

Fifth Edition (August 1994)

| This major revision obsoletes and replaces SA40-0593-03. Changes or additions to
| the text and illustrations are indicated by a vertical line to the left of the change.

Changes are made occasionally to the information herein; any such changes will be
reported in subsequent revisions or Technical Newsletters.

Publications are

not stocked at the address given below. U.S. customers can order

publications by calling the IBM Software Manufacturing Company at 1–800–879–2755.
Outside the U.S., customers should contact the IBM branch office serving their locality.

A form for reader's comments is provided at the back of this publication. If the form
has been removed, comments may be addressed to IBM Corporation, Information
Development, Dept. G60, 1701 North Street, Endicott, NY, 13760-5553 USA. IBM
may use or distribute whatever information you supply in any way it believes
appropriate without incurring any obligation to you.



Copyright International Business Machines Corporation 1991, 1994. All rights

reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use,
duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule
Contract with IBM Corp.

«
...
2
3
4
5
6
...
»

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

































































































































































































































































































































Отзывы:

Нет отзывов