IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 105

Страница: 105 / 320

The printer displays

5. If the default value does not give the best print sample, press

Scroll

↓

or Scroll

↑

until the printer displays the same number of

arrows that were printed beside the

best print sample line. Press

Enter to set this as the new default value. The printer then
prints another line to demonstrate the new default value, and the
test is complete.

Press Stop to end the test without changing anything and return
to the Operator Print Tests menu.

Press Cancel Print to end the test, exit test mode, perform a
partial reset, and have the printer display

Note: See Chapter 5, “Using the Operator Print Tests” for more
information.

Bidirectional Adjustment

READY

<A>

Chapter 1. Setting Up the 4230 Printer

1-83

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

































































































































































































































































































































Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы:

IBM 4230 - Model 4i3 B/W Dot-matrix Printer, Руководство пользователя, Страница: 105 / 320

Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы: