IBM 4230 - Model 4i3 B/W Dot-matrix Printer Скачать руководство пользователя страница 176

Страница: 176 / 320

Power Indicator
The Power indicator has two operating conditions:

The printer is receiving power.

Off

The printer is not receiving power.

Ready Indicator
The Ready indicator has two operating conditions:

The printer is

ready to print.

Off

The printer is

not ready to print.

Processing Indicator
The Processing indicator has three operating conditions:

The printer is currently processing data.

Off

There is no data to be processed and no data is buffered
in the printer.

Blinking

The printer has data buffered, but it cannot currently be
printed.

Online Indicator (Models 101, 1S2, and 4S3)
The Online indicator has two operating conditions:

The printer is communicating with the computer.

Off

The printer is not communicating with the computer.

Format Indicator (Models 201 and 2S2)
The Format indicator has two operating conditions:

The Cancel Print, PA1, and PA2 keys are available for
use (that is, you can press them in the printer’s current
state).

Off

The PA1 and PA2 keys are not currently available. The
Cancel Print key is only available when running an
Operator Print Test.

Use the PA1 and PA2 keys to send special operator requests. See
“Understanding the Operator Panel” in the

IBM 4230 Printer Models

101, 1S2, 201, 2S2, 4S3, and 5S3 Operator Panel Instructions for
more information on these keys.

3-12

User’s Guide

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

































































































































































































































































































































Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы:

IBM 4230 - Model 4i3 B/W Dot-matrix Printer, Руководство пользователя, Страница: 176 / 320

Результаты поиска

Содержание 4230 - Model 4i3 B/W Dot-matrix Printer

Отзывы: