IBM 2-Gigabit Fibre Channel PCI, Инструкция по установке и использованию

Страница: 16 / 52

Press Enter. The system finds and highlights this device driver software and
displays output similar to the following example:
4.3.3.0 devices.pci.df1000f7 ALL
12. Press PF7 to select the device software, and press Enter.
13. The Install Additional Device Software screen displays. Entry data fields are
automatically updated. Press Enter to accept the data.
14. The ARE YOU SURE window displays. Press Enter to accept the data.
15. The COMMAND STATUS window appears.
v
The term
RUNNING
is highlighted to indicate that the install and configure
command is in progress.
v
When
RUNNING
changes to
OK
, scroll down to the bottom of the page and locate
the Installation Summary.
v
After a successful installation,
SUCCESS
displays in the Result column of the
summary at the bottom of the page.
16. Remove the installation media from the drive.
17. Press F10 to exit SMIT.
18. Go to the adapter installation procedure, “Chapter 5. Installing the Gigabit Fibre
Channel PCI Adapter” on page 21.
2-Gigabit Fibre Channel PCI Adapter (Type 4-W)
To install the device driver software, do the following:
1. Be sure you have read “Chapter 2. Preparing to Install a Gigabit Fibre Channel
PCI Adapter” on page 3 to determine:
v
If you should install your device driver software first, go to step 2 and continue
with this section.
v
If you should install your hardware first, go to chapter 5,
″
Installing Hardware
″
.
When you install AIX, your adapter device driver automatically installs.
2. Turn on the system unit power.
3. At the system prompt, log in as root user.
4. Insert the media containing the device driver software (example: CD-ROM) into the
appropriate media device.
5. To start SMIT, type:
smitty devinst
Press Enter.
6. The Install Additional Device Software screen highlights the INPUT
device/directory for software option.
7. Select or type your input device:
v
Press F4 to display the input device list. Select the name of the device
(example: CD-ROM) that you are using and press Enter.
OR
v
In the Entry Field, type the name of the input device you are using and press
Enter.
6
Installation and Using Guide