Copyright Velocomp LLP 2005-2014
36
CAL WIND
CRITICAL:
MAKE SURE THERE IS NO WIND BLOWING INTO THE WIND PORT; SEE PAGE
20.
Let the number in the top window stabilize, then click the center button to do a “Cal Wind”.
TIP:
YOU CAN PERFORM A “CAL WIND” WITHOUT ENTERING SETUP. SEE PAGE 20 FOR
DETAILS
SET FILT
(Set Display Smoothing Filtering)
A display filter averages (smooths) wattage numbers displayed on your screen. To access
the filter, go to Setup/”Set Filt” (Set Filter). The number in the top of the screen shows
your current filter setting, in seconds. Available choices are dps (Dynamic Power
Smoothing), 2 (2 second), 3, 5, 10, and 30 second filtering. For example, when set to “5”,
the wattage number currently displayed on your Newton screen is averaged over a 5
second period.
If you’re a racer who does a lot of sprinting, then a 0 or 2 second filtering will give you very
fast response; however, your wattage display will be a bit jumpy.
For sprint training and riding, a 3 or 5 second filtering is a good choice, but watts will tend
to be jumpy.
For long endurance and TT rides at a constant pace, 10 or 30 second filtering will give you
very smooth readings, but poor responsiveness when sprinting.
To change the filtering number click the center button, then select your choice with the top
arrow. Click the center button to save.
NOTE
: NO MATTER WHICH DISPLAY FILTER SELECTION YOU MAKE, YOUR RIDE FILE DATA
WILL BE RECORDED WITHOUT ANY FILTERING, AND WITH HIGHEST SENSITIVITY.
CONTROLS IN THE ISAAC SOFTWARE WILL ALLOW YOU TO APPLY SMOOTHING TO YOUR
RIDE FILE INFORMATION DISPLAYED IN THE ISAAC WINDOWS.
TIP:
DYNAMIC POWER SMOOTHING IS NEW TO FW 5.0 AND IS A GREAT SETTING TO USE.
SEE PAGE 18 FOR DETAILS
ALT(IMETER)
Click the center button. Use the left/right/top/bottom arrows to set your current elevation.
Click the center button to accept. “done” flashes
TIP:
YOU CAN SET/CORRECT YOUR ELEVATION WITHOUT ENTERING SETUP. SEE PAGE
13-14 FOR DETAILS
TRNR ON/OFF
This screen turns the Indoor Trainer function on or off. Click the center button, select your
choice with up/down arrows, click center button to accept.
36
