Copyright Velocomp LLP 2005-2014
24
To use the indoor trainer feature, you will do three things:
1)
Using ISAAC, select your model of trainer/rollers
2)
Using ISAAC, turn on the indoor trainer mode in your Newton
3)
Before riding outdoors, turn off the indoor trainer mode in your Newton
SELECT INDOOR TRAINER/ROLLER MODEL
1)
Connect your Newton to ISAAC.
2)
Go to Device/Edit Trainer Settings…
3)
Select your model of trainer
4)
Click the “send to iBike” button
Your Newton will remember the model of trainer you have selected
TURN “ON” THE INDOOR TRAINER MODE (“TRNR ON”); SELECT MODELS ONLY
1)
Connect your Newton to ISAAC
2)
Go to Device/Turn On Indoor Trainer Mode
NOTE
: INDOOR TRAINER WORKS ONLY WITH CERTAIN MODELS. THIS COMMAND WON’T
WORK IF YOUR NEWTON DOES NOT HAVE THE INDOOR TRAINER FEATURE INSTALLED.
3)
(OR, select Newton models only): Enter Setup, click arrow to find “trnr off”, click the
center button. “off” flashes. Use the up arrow to select “on”, then click center
button to accept. “done” flashes.
4)
Exit Setup. Your Newton is ready to use with your indoor trainer.
RIDING WITH THE INDOOR TRAINER MODE
Each time you do a Trip Reset, your Newton will remind you that you are in Indoor Trainer
mode, by showing the message “Trnr On”. To clear the message, and use the indoor
trainer function, click any button. You’re ready to ride!
DOWNLOADING RIDE FILES
You can download your indoor trainer ride files in ISAAC after you’ve completed your ride.
When downloading ride files recorded with the Indoor Trainer function On, the status
window of your ISAAC will read “Indoor Trainer”.
HOW TO TURN THE INDOOR TRAINER FUNCTION “OFF”
24
