Copyright Velocomp LLP 2005-2014
34
How to
enter
the Set Up Mode
1.
Click any button to wake-up the Newton
2.
Press and hold the up-arrow for about 2 seconds
(UP-ARROW FOR SET UP); the
words “set up” will appear. When the set-up screen appears release the button.
3. IF NOTHING HAPPENS WHEN YOU PRESS-HOLD THE UP ARROW, THEN YOUR
NEWTON DOES NOT HAVE ACCESS TO SETUP SCREENS. Instead, use ISAAC to change
your Newton’s settings.
How to
exit
the Set-Up Mode
1. Press-hold the UP arrow for two seconds, OR
2. Do not press any button for 30 seconds.
NAVIGATING THE NEWTON SETUP
SCREENS
Once entering the “Setup” mode (press-hold up arrow for two seconds), scroll to any setup
screen by clicking the up or down arrows located on the red button:
Click the up arrow: advance to the NEXT setup screen,
Click the down arrow: return to the PREVIOUS setup screen
Each setup screen displays one step of the Newton’s setup process.
Setup screens are organized like a Rolodex. You can scroll forwards and backwards to any
setup screen. When you reach the final screen and click the up arrow to advance to the
next screen, you will return to the first screen.
Here are the functions that are accessible through Setup:
•
OS (firmware version)
•
PowerStroke Recording On/Off (“On Fast Rec”)
•
Cal Ride
•
Set Profile (Set Prof)
•
Cal Wind
•
Set Filt (set smoothing filter)
•
Alt(imeter)
34
