Iberital 1 series, Руководство по эксплуатации, Страница: 18 / 38

IBERITAL DE RECAMBIOS, S.A.
Page 17 of 22 manual electr.ce ingles 22-11-2004.doc
Every evening or at least once a day it is necessary to carry out the following:
Rinse the filters and filter bowls in hot water every evening or at least once during the day.
Further still allow them to soak overnight in water which is initially hot in order to dissolve
the fat deposited by the coffee.
Clean the spray jets and gaskets of the lower feed unit as follows:
- press the coffee feed button.
- place the filter holder (23) or (25), fitted with the cleaning blind filter (26), into the feed
unit.
- Grip the filter holder at the end of the handle; rotate the filter holder to and through in order
to allow the hot water to have a rinse effect on the unit.
-
Clean the gasket of the lower feed unit group using a soft cloth or a sponge.
-
Clean the steam jets and cappuccinator using URNEX milk frother and steam jets cleaner.
Cleaning the groups
a) Substitute the normal filter (22) or (24) with the cleaning filter (blind) (26).
b)
Place a couple of spoonfuls of detergent (bags of 20 gr. - Code 3852 URNEX – NSF
approved) into the cleaning filter (blind) (26).
c)
Place the filter holder into the feed unit.
d)
Switch on the unit and leave it working for several seconds (15-20").
e)
Stop the unit by pressing the feed button a second time; during the decompression of the
unit the hot water and detergent will clean the feed group.
f)
Repeat point (e) several times.
g)
Rinse the unit and without the filter holder into the feed unit push any feed button to clean
any residual detergent.
Cleaning the outer shell of the machine
The external panelling of the machine should be cleaned with hot (not boiling) soapy
water and then rinsed thoroughly, using a soft cloth or a sponge. Do not use abrasive
substances as these could scratch the surface of the panels.
1.9.- CHANGING THE BOILER WATER