iBell CM35-24, Руководство оператора

Страница: 13 / 21

12
The Lock clamp (13) makes easier handling of the machine when
transporting to various working locations as well as for safety and
easy storage.
Securing the machine (Transport/Storage Position):
Swing the tool arm with the operating handle downward till it
stops. Press in the clamp and release the handle.
Releasing the machine (Working Position):
Press the tool arm with the operating handle of the machine
downward to relieve the load on the lock clamp. Pull the clamp
outward and guide the tool arm slowly upward.
SHAFT LOCK CLAMP (LOCK PIN)
IBL CM35-24
NOTE:
The direction in which the cutting wheel rotates has to be the
same as the direction of the arrow marked on the guard.
After replacing the cutting wheel, make sure that the cutting wheel
runs freely by turning the cutting wheel by hand.
Transport
Position
Working
Position
13
NOTE:
Always adjust the depth stop (12) so that the cutting disc does
not touch the base plate when sawing.