iBell CM35-24, Руководство оператора

Страница: 7 / 21

6

Position yourself and bystanders away from the plane of the
cutting disc.
The guard helps to protect the operator from broken
wheel fragments and accidental contact with wheel. Keep your
hands away from cutting area and the blade.

Hold the power tool by insulated gripping surfaces only and
second hand on tool arm.
Keep your body positioned to either
side of the blade, but not in line with the blade.

Use only bonded reinforced cut-off wheels for your power tool.
Just because an accessory can be attached to your power tool, it
does not assure safe operation

Always use blades (cutting wheel) of correct sizes and rated
speed.
Suitable blade is available within the product, use of it is
highly recommended. The parameters for selecting a cutting blade
are mentioned in the ‘Product specification’ section.

When cutting metal, sparks are generated (obvious), so take care
that no persons are endangered. Because of the danger of fire, no
combustible materials should be located in the vicinity (spark
flying zone).

Do not overload your tool , use it only for the adequate purpose.
Using the power tools for purposes that are different from what is
indicated in this manual (refer ‘Intended Use’) might lead to
hazardous situations.

Wait for the blade to come to a complete stop , note that there is
a period of inertial movement before the tool stops, after it’s
turned OFF.

The use of this tool create and/or spread dust that may cause
serious and permanent respiratory injuries
. To reduce the
exposure to these substances, work in well-ventilated places and
always
use dust mask.

Wear ear protectors. Exposure to noise can cause hearing loss.
Wear safety goggles or eye protection when using this power
tool. For additional protection against electric shock, be sure to
wear rubber gloves.
CUT-OFF MACHINE SAFETY WARNINGS
IBL CM35-24