iBell CM35-24, Руководство оператора

Страница: 8 / 21

7

When operating the tool, keep the cord away from the cutting
area
and position it so that it will not be caught on the work piece
during the cutting operation. When an extension cord is required
you must ensure it has the correct ampere rating for your power
tool and that it is in a safe electrical condition.

Blade depth and adjusting locking bolt must be tight and secure
before making cut
. If blade adjustment shifts while cutting, it may
cause binding and kickback.

Make sure the cutting blade is not contacting the work piece
before the switch is turned on.
Wait until the cutting wheel attains
full speed before cutting. Stop operation immediately if you notice
anything abnormal.

Do not force the cutting disc into the work piece or apply too
much pressure when using the machine.
When the cutting disc is
damaged due to misuse, it may develop cracks that could lead to
bursting without warning.

The cutting disc must be flawlessly mounted and be able to
rotate freely.
Make a test run for at least one minute without load.
Do not use damaged, out of round or vibrating cutting discs.
Always correctly adjust the depth stop. When the depth stop is not
properly adjusted, the cutting disc can cut into the surface
underneath the base plate.

Use the machine only for dry cutting. Store the product and
cutting wheel in a dry location only.

If the wheel stops during the operation, makes an odd noise or
begins to vibrate, switch off the tool immediately.

Avoid overloading the motor especially when working with
large work pieces
. When cutting, apply only light pressure to the
handle.

Do not work with magnesium or materials containing asbestos.
Protect the cutting disc from impacts, shocks and grease.

Always wait until the power tool has come to a complete stop
before making any adjustments.
Do not stop the cutting wheel by
lateral pressure on the disc.
WARNING!
Misuse or failure to follow the safety rules stated in
this instruction manual may cause serious personal injury.
IBL CM35-24