iB-WRA150N
150M Wireless-N ADSL2+ Router - User Guide
MAC Filtering Global Policy
- The default setting is
Allow
.
•
Allow
means that all MAC layer frames will be forwarded except those matching with any of
the specified rules in the following table.
•
Deny
means that all MAC layer frames will be blocked except those matching with any of the
specified rules in the following table.
You can change the policy by clicking the Change Policy button to go to the
Change MAC
Filtering Global Policy
page as shown in Figure 4-76.
Figure 4-76
To add a new entry, follow the steps below.
1. Click
the
Add
button in Figure 4-75 to go to the Add MAC Filter page as shown in Figure 4-77.
2. Select the protocol type.
3. Enter the destination MAC address.
4. Enter the source MAC address.
5. Select the frame direction.
6. Select the WAN interfaces.
7. Click
Save/Apply
to save your settings.
Figure 4-77
To remove an existing entry, follow the steps below.
1. Check
the
Remove
box as shown in Figure 4-75 in the entry you want to remove.
2. Click
the
Remove
button.
68
