iB-WRA150N
150M Wireless-N ADSL2+ Router - User Guide
Figure 4-51
¾
Enable Automatic Assigned Default Gateway
- Select this checkbox, and then the Router
will accept the first received default gateway assignment from one of the PPPoA, PPPoE or
MER/DHCP enabled PVC(s). If this checkbox is not selected, you have to enter the static
default gateway and/or an interface. Click
Save/Apply
to save your configurations.
)
Note:
If changing the Enable Automatic Assigned Default Gateway from unselected to selected, you
must reboot the Router to get the automatic assigned default gateway.
4.7.3.2 Static Route
Choose “
Routing
→
Static Route
” menu, you can view and add the Static Route entry in the next
screen as shown in Figure 4-52. A static route is a pre-determined path that network information
must travel to reach a specific host or network.
Figure 4-52
To add a new entry, follow the steps below.
1. Click
the
Add
button in Figure 4-52 to go to the Static Route Add page as shown in Figure
4-53.
2. Enter the IP address of the destination network. This parameter specifies the IP network
address of the final destination.
3. Enter
the
Subnet Mask
for the destination.
4. Select the Use Gateway IP Address checkbox and enter the IP address of the gateway. The
gateway is an immediate neighbor of your ADSL Router that will forward the packet to the
destination. On the LAN, the gateway must be a router on the same segment as your Router;
over Internet (WAN), the gateway must be the IP address of one of the remote nodes.
5. Click
Save/Apply
to save your configurations. Then you will go back to Figure 4-52 and see
your new entry.
55
