ibaMBox
Manual
Issue 1.3
13
6
Assembly, connection, disassembly
6.1
Connection
1.
Disconnect ibaMBox from the power supply.
2.
Connect all measuring cables.
3.
If you are using an external notebook, connect the central unit to the notebook via an
ibaNet fiber optic patch cable (duplex):
the RX input (X11) of the central unit with the TX interface of the ibaFOB-io-Ex-
pressCard in the notebook,
the TX output (X10) of the central unit with the RX interface of the ibaFOB-io-Ex-
pressCard in the notebook.
4.
If you have connected all the necessary cables, switch the voltage supply on at the
on/off switch.
6.2
Start-up
Refer to the information on setup and configuration with ibaPDA (or ibaCMC) in the man-
ual of your central unit.
6.3
Disassembly
1.
Disconnect ibaMBox from the power supply.
2.
Remove all cables.
