Manual
ibaMBox
6
Issue 1.3
2
Introduction
The ibaMBox mobile measuring system is based on the iba modular system, which is
integrated in a compact and sturdy aluminum case. The same modules are used in
ibaMBox as are in the iba modular system; the backplane has been newly designed for
ibaMBox. In ibaMBox, a central unit can be combined with up to 4 I/O modules; the
central units and I/O modules available for ibaMBox are listed in the table below. The
communication and power supply of the modules is provided via a backplane bus built
into the case. ibaMBox is supplied pre-configured.
Central units
I/O modules
- ibaPADU-S-CM
(for modular data acquisition system)
- ibaPQU-S
(for power quality monitoring applications)
-ibaCMU-S
(for condition monitoring applications)
-ibaDAQ-S
(for stand-alone data acquisition)
ibaMS3xAI-1A
ibaMS3xAI-5A
ibaMS3xAI-1A/100A
ibaMS4xAI-380VAC
ibaMS8xAI-110VAC
ibaMS16xAI-10V (-HI)
ibaMS16xAI-24V (-HI)
ibaMS16xAI-20mA
ibaMS16xDI-220V
ibaMS16xDI-24V
ibaMS32xDI-24V
ibaMS8xICP
ibaMS8xIEPE
ibaMS4xUCO
Data acquisition
With the central units, ibaPADU-S-CM or ibaPQU-S, ibaPDA is required as an external
data acquisition system, which runs, for example, on a notebook. The notebook is con-
nected to the central unit via an ibaFOB-io-ExpressCard and a bidirectional fiber optic
connection.
Figure 1:
Data acquisition with ibaPDA and notebook
