Manual
ibaMBox
14
Issue 1.3
7
Device description
7.1
Device image
Figure 4:
Open ibaMBox
1
Cable entry
2
Connector panels (depending on the order)
3
Voltage supply
4
Electrical socket
5
Interfaces of the built-in central unit
6
FO output (TX) X10
7
FO input (RX) X11
8
Operating status display of the central unit L1... L4
9
Fan
7.2
Connector panels
Depending on the modules built in, the connector panels are optionally available with
BNC, banana or Phoenix connectors.
The following figures show each type of connector panel as an example. The number of
connectors depends on the modules actually built in.
7.2.1
Central units
The connector panels of the central units are only available with Phoenix connectors. In
addition to the digital inputs and outputs, a 2-pin Phoenix connector is used for the power
supply for other iba devices (power out: 24 V, max. 20 W).
The connectors of the ibaPADU-S-CM, ibaCMU-S and ibaPQU-S central units are the
same.
