IBA ibaPQU-S, Руководство пользователя

Страница: 42 / 127

Manual ibaPQU-S
42
Issue 1.5

Use name as prefix
If “True” is selected, the module name is prefixed to the signal names of this module.
Connection

IP address
IP address or host name of the ibaPQU-S device (read only).

Auto enable/disable
If this option is enabled and ibaPDA cannot establish a connection to this device when
starting the measurement, it will disable this module and start the measurement without
the module. During the measurement it tries to restore the connection. If this attempt is
successful, the measurement is restarted automatically with the enabled module. If this
option is not enabled, ibaPDA will not start the measurement if it cannot establish a con-
nection to the device.
Power grid

AC/DC
Select the grid type to be measured in the drop-down menu.

Power frequency
Select the power system frequency from the drop-down menu.

Default values: 50 Hz, 60 Hz
 When “custom” is enabled, you can enter a value between 10 Hz and 80 Hz.

Reference signal
Select one of the connected phases used as reference signal to synchronize the sam-
pling.
More functions

Read configuration from device
Reads the configuration stored most recently from the device.
Click <OK> or <Apply> to apply the modified settings.