IBA ibaPQU-S, Руководство пользователя

Страница: 76 / 127

Manual ibaPQU-S
76
Issue 1.5

Only currents
For the calculation only currents are being used. For this purpose, you need to
indicate for each conductor its impedance in Ohm.

Voltages and currents
The flicker for voltages and currents is calculated. For the current flicker calcula-
tion you need to indicate the impedance of the single conductors.
“Analog” tab
Signal Meaning
U# Instantaneous flicker severity ###V Pinst Value for the current flicker severity
U# Flicker severity ###V Pst Short-term flicker level Pst
U# Flicker severity ###V Plt Flicker value according to a cubic average of
Pst values

Name
The names are set by default but can be edited. To allow an unambiguous identification,
they contain the input channel and the characteristic value. You can additionally assign
two comments by clicking the
icon in the signal name field.

Unit
Display of the relevant unit.

Active
Here you can enable or disable the signal.