IAME REEDJET 100cc, Руководство по капитальному ремонту

Страница: 18 / 30

MAN – 086 – ENG - 17
Apply the “Loctite” thread locker. Assemble fixing nut, clutch hub and starter wheel, using the
STARTER WHEEL LOCKING TOOL and SOCKET WRENCH 27mm (torque 100÷110Nm
900÷990lb-in).
WARNING: SCREW COUNTER CLOCKWISE AS THE NUT HAS LEFT-HAND THREAD.
Assemble the internal washer (the bevel of the washer hole must be towards the shaft). Install the
O-Ring. Clean the roller cage and grease it before assembling it on the shaft.
Mount the clutch drum and external washer (the bevel of the washer hole must be towards the shaft).
With the ATT.037 STARTER WHEEL LOCKING TOOL, tighten the drum retaining nut (nut M10).
Use RING WRENCH 17mm (torque at 30÷40 Nm – 270÷360 lb-in).
15