IAME REEDJET 100cc, Руководство по капитальному ремонту

Страница: 12 / 30

MAN – 086 – ENG - 11
Oil crankpin and crankpin hole on crankshaft half. Put tool in vertical position. Progressively
press the two crankshaft halves together. Open the tool, put it in horizontal position and
extract the crankshaft.
Check the axial clearance of the conrod, it must be MIN. 0.4mm / MAX. 0.6mm
IF CLEARANCE IS HIGHER OR LOWER, REBUILD THE CRANKSHAFT
AFTER ASSEMBLY, THE CRANKSHAFT MUST BE ALIGNED. OTHERWISE EXCESSIVE
VIBRATION, HARD STARTING OR POOR ACCELERATION WILL RESULT.
Place the crankshaft between the centres with dial gauges indicators reading on left and
right bearing seats. Use the copper hammer to align the crankshaft (if necessary).
Rotate crankshaft and look at deflection of gauge needles. The deflection must be, after
centring, MAX. 0,01mm.
ENGINE ASSEMBLY
Before re-assembling, wash all parts with kerosene / diluent
Crankcase Assembly
9