IAME REEDJET 100cc, Руководство по капитальному ремонту

Страница: 22 / 30

MAN – 086 – ENG - 21
Install the Reed Pack
Place the inner gasket on inlet conveyor, check status.
ATTENTION
FIRST CHECK STATUS OF REED PETALS BEFORE INSTALLING THE REED PACK. REPLACE PETALS IF
CRACKED, OR IF LOOKING WITH BACK LIGHT, THE PETALS DO NOT SHUT PERFECTLY, LOOSEN
THE N°8 SCREWS AND INSERT NEW PETALS WITH BOTTOM CUT TOWARDS RIGHT.
Position the reed pack and its gasket, install the reed pack group into the inlet seat of the engine,
with IAME marking on top, check before tightening.
Tighten n°4 TCEI M6x25 with ALLEN WRENCH 5mm T TYPE. Install the carburettor gasket.
Install the exhaust manifold
Place gasket and install the exhaust manifold. Insert washers and tighten n°2 COLUMN NUTS M8.
19