MAN048 ING
37
3.
REMOVE DRUM FROM STARTER
KEEPING ROTOR IN ITS SEAT
(BE SURE TO HOLD THE ROTOR ON ITS
TOOTHED SIDE TO PREVENT BRUSHES
FROM FALLING OUT FROM THEIR SEAT)
(see Fig.7)
REMOVE ROTOR FROM STARTER HEAD
(see Fig.8)
ATTENTION:
WHEN EXTRACTING ROTOR, THE BRUSHES
MAY SPRING OUT FROM THEIR SEATS.
REPLACING THE BRUSH “A”
UNSCREW THE 2 SCREWS M4 “D”
RETAINING THE PLATE “E” (see Fig.9).
(SCREWDRIVER)
REMOVE THE LITTLE RUBBER CAP “F” (see
Fig.10).
(PLIERS)
OUR SUGGESTION:
SLIGHTLY OIL THE TIN PLATE TERMINAL
END, TO MAKE EASIER THE EXTRACTION OF
THE LITTLE RUBBER CAP.
Fig.4
Fig.7
Fig.8
Fig.9
Fig.10
