IAI ELECYLINDER EC-WS10 R Series, Руководство пользователя

Страница: 35 / 36

Four-way connector cable
This cable allows the connector direction to be changed to any of 4 directions.
The cable wiring for the connector is the same as that of power I/O cable CB-EC-PWBIO
□□□
-RB.
Model: CB-EC2-PWBIO
□□□
-RB (user wiring specification)
CB-REC2-PWBIO
□□□
-RB (RCON-EC connection specification)
Top side
cable
Right side
cable
Left side
cable
Down side
cable
Cable direction can be set to any of 4 directions
˜
The wiring on the side opposite the connector is left
unprepared.
˜
The cable length may be from 1m to 10m long.
The length can be specified in 1m units.
˜
Example models are listed below.
Cable length 1m
g
CB-EC2-PWBIO010-RB
Cable length 3m
g
CB-EC2-PWBIO030-RB
Cable length 10m
g
CB-EC2-PWBIO100-RB
Maintenance Parts (Cable)
①
Insert while sliding along the groove
in the desired direction from the
semi-cylindrical curved portion.
②
Confirm that the cable has been
firmly inserted, and then insert the 2
sides of the lid along the groove.
③
Finally, press the remaining side of
the lid.
Follow the procedure below to assemble the connector in the desired direction.
Curve
straight
Insert the 2
sides of the
lid
Press
Maintenance Parts (Cable)
34
EC
ELECYLINDER
®