IAI ELECYLINDER EC-WS10 R Series, Руководство пользователя

Страница: 24 / 36

Air cylinder mounting plates
Description
Model
CS
These plates provide compatibility for mounting with some models of rodless air cylinders.
Plates can be mounted to the slider carriage and actuator base to align their heights with the slider on an air cylinder.
*Not shipped assembled. Assembly required.
(Note 1) Selecting CS will reduce the payload by 1kg.
(Note 2) Cannot be side mounted, invert mounted, or vertically mounted.
EC-(D)WS10 / (D)WS10 □ R
Individual model number Base bracket: EC-CSB-WS10-(stroke) (material: aluminum)
Slider bracket: EC-CSS-WS10 (material: carbon steel, nickel plated)
u
Additional accessories
•Hex socket bolts (for mounting to the slider carriage): M5×10 (4 bolts)
•Parallel pin: φ5×8 type B h7 (2 pins)
•Hex socket bolts (for mounting to the actuator base): M5×35 (no. of bolts shown in following table)
•Square nuts:
£
8×4 M5 (no. of nuts shown in following table)
Stroke 50 ~ 100 150 ~ 300 350 ~ 500
Quantity 4 6 8
u
Mass by stroke (plate addition)
Stroke 50 100 150 200 250 300 350 400 450 500
Added mass (kg) 2.1 2.2 2.4 2.6 2.8 2.9 3.1 3.3 3.4 3.6
Options
Options
ACR
This option should be selected to connect over an R-unit to a field network.
* When this option is selected, the power source becomes twin power and input/output specifications are fixed to NPN. Therefore, TMD2
and PN options cannot be selected at the same time.
ST+264
8
140
(155)
(8)
6.
5
51
80
15
60
ST+280
4- φ 6.6 through
φ
11 deep counterbored, depth 7.5
4-M6 depth 8
1 108
14
(46
)
8
68
60
(84)
110
108
60
（84）
110
14
（46）
8
1
68
（87.5）
＜
(D)WS10
□
R
＞ ＜
(D)WS10
＞
Brake
Description
Model
B
This mechanism stops the slider from moving when the power or servo is turned off. This option is necessary when the actuator is
used vertically.
Applicable models
All models
Description
Model
Applicable models
All models
Applicable models
All models
RCON-EC connection specification
*Cannot be selected with the TMD2 and PN options (the ACR option includes the split
motor and controller power supply specification)
23
EC
ELECYLINDER
®