manualshive.com logo in svg

IAI EC-RR6*AH series, Инструкция по эксплуатации, Страница: 295 / 348

Поделиться
Скачать
IAI EC-RR6*AH series Скачать руководство пользователя страница 295

 

8.5 Greasing method 

8-15 

8. Maintenan

ce and Inspection 

 

High rigidity radial cylinder type (EC-RR

□□

AH),  

High rigidity radial cylinder type (EC-RR

□□

H) 

 

[1] Grease used:

 Use an equivalent product

 

 

Application 

location 

During maintenance 

(recommended product) 

Default (reference) 

Rod sliding 

surface 

Kyodo Yushi/Multemp LRL No.3

Kyodo Yushi/Multemp LRL No.3

Ball screw 

Guide 

 
 

Caution 

Never use fluorine-based grease. 
Mixing with lithium-based grease not only reduces the performance of the grease, it may 
even cause damage to the ELECYLINDER. 

 

[2] Greasing method:

 Rod sliding parts 

 

(1) Pull the rod towards the non-motor side. 

(2) Clean the rod sliding surface and apply the grease by hand. 

(3) Move the rod full-stroke to apply the grease thoroughly. 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

Apply to rod sliding surface 

(0.5 to 1.0cc) 

Rod sliding parts greasing method

* To release the brake,   

refer to 

Brake release method

 (page 3-10)

Содержание EC-RR6*AH series





























































































































































































































































































































































Отзывы:

Нет отзывов